BRBRK - F 1120
- MSDS: BRBRK
- Manufacturer: BRUNING PAINT CO INC
- Product Name: F 1120
- National Stock Number: 8010-00F028210
Product Identification
Product ID:F 1120
MSDS Date:11/04/1986
FSC:8010
NIIN:00F028210
MSDS Number: BRBRK
Responsible Party
BALTIMORE, MD 21224-4347
US
Emergency Phone: 301-342-3636AM/301-342-3641PM
Info Phone: 301-342-3636AM/301-342-3641PM
Cage: EO376
Contractor
Telephone: 800-368-2076
Cage: 85520
Ingredients
RUTILE
CAS: 1317-80-2
RTECS: XR2275000
Fraction By Weight: 1-5%
OSHA PEL 15 MG/CUM
ACGIH TLV: 10 MG/CUM (DUST)
ALUMINUM SILICATE ANHYDROUS *93-1*
CAS: 22708-90-3
Fraction By Weight: 5-7.5%
SILICA DIOXIDE, CRYSTALLINE QUARTZ, SAND (SUSPECTED HUMAN
CAS: 14808-60-7
RTECS: VV7330000
Fraction By Weight: 1-5%
OSHA PEL SEE TABLE Z3
ACGIH TLV: 0.1 MG/M3 RDUST;9293
1), CALCIUM CARBONATE,
CAS: 471-34-1
RTECS: FF9335000
Fraction By Weight: 35-50%
13.6
RTECS: 9999999WG
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO
Health Hazards Acute and Chronic:EYES/SKIN: IRRITATION.
Explanation of Carcinogenicity:SEE INGREDIENTS
First Aid
First Aid:EYES: FLUSH W/PLENTY OF WATER FOR 15 MIN. SKIN: WASH W/SOAP &
WATER. INGESTION: DRINK 1 OR 2 GLASSES OF WATER TO DILUTE. DON'T
INDUCE VOMITING. TREAT SYMTOMATICALLY. OBTAIN MEDICAL ATTETION IN
ALL CAS ES.
Fire Fighting
Flash Point Method:TCC
Fire Fighting Procedures:WATER MAY BE USED TO COOL CONTAINERS TO
PREVENT PRESSURE BUILD-UP OR EXPLOSION WHEN EXPOSED TO EXTREME
HEAT.
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE DUE TO
PRESSURE BUILD-UP WHEN EXPOSED TO EXTREME HEAT.
Accidental Release
Spill Release Procedures:DIKE & ABSORB SPILL W/INERT MATERIAL (SAND,
VERMICULITE, ETC.) & TRANSFER TO CONTAINER FOR DISPOSAL. WASH UP
RESIDUE W/SOAP & WATER.
Handling
Handling and Storage Precautions:KEEP FROM FREEZING. DON'T STORE >120F,
OR TAKE INTERNALLY. CLOSE CONTAINER AFTER EACH USE. KEEP OUT OF
REACH OF CHILDREN.
Other Precautions:PRODUCT CONTAINS PIGMENTS WHICH MAY BECOME A DUST
NUISANCE UPON ABRASIVE BLASTING, SANDING OR GRINDING.
Exposure Controls
Respiratory Protection:APPROVED MECHANICAL FILTER RESPIRATOR TO REMOVE
SOLID AIRBORNE PARTICLES OF OVERSPRAY DURING SPRAY APPLICATION.
Ventilation:SUFFICIENT TO KEEP THE AIR CONTAMINANT CONCENTRATION BELOW
THE ACGIH TLV LIMIT.
Protective Gloves:IMPERVIOUS
Eye Protection:SPLASH-PROOF GOGGLES/SAFETY EYEWEAR
Other Protective Equipment:SPLASH GUARDS OR SIDE SHIELDS. USE PETROLEUM
JELLY WHERE PROLONGED SKIN CONTACT IS LIKELY.
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE
REUSE. WASH HANDS W/SOAP & WATER AFTER USING.
Supplemental Safety and Health
Chemical Properties
Boiling Pt:B.P. Text:212-490F
Percent Volatiles by Volume:51.29%
Stability
Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:HEAT, FREEZING & TEMPS >120F.
Hazardous Decomposition Products:CO & CO2
Disposal
Waste Disposal Methods:LANDFILL IN ACCORDANCE W/LOCAL, STATE, & FEDERAL
REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.